Expand your wireless flash and camera setup with this FA-WRR1 Wireless Radio Receiver from Sony. Featuring a Multi Interface Shoe on the top, this receiver will directly support most Sony-compatible flash units and will even work in manual mode with flashes that use the Auto-lock Accessory Terminal along with an adapter. For full functionality a flash with the Multi Interface Shoe is required, enabling TTL and High-Speed Sync support as well as all remote control functions via the FA-WRC1M Wireless Radio Controller. In order to ensure reliable performance, the system uses a 2.4 GHz radio signal with a range of up to 98.4'. Also, it can operate on one of 14 channels and with up to 5 groups.
In addition to a flash connection, the receiver offers a standard PC sync terminal for connecting to alternative strobes and lights. There is also a Multi Terminal connection for remote triggering of an a7 II, a7R II, or a7S II camera with the use of the separately available VMC-MM1 Multi Terminal. For mounting the flash setup to a stand, the receiver features a cold foot on the base with a 1/4"-20 thread. Additionally, it is dust and moisture resistant for operating in less-than-ideal environments.
2.4 GHz radio system has an effective range of 98.4' and can operate without direct line of sight
Works directly with Sony flashes equipped with Multi Interface Shoe, including HVL-F60M, HVL-F43M, and HVL-F32M
Sony flashes using the older Auto-lock Accessory Terminal can work in manual mode only with the use of a separately available adapter
Fourteen channels and up to five groups are available
TTL and High-Speed Sync at up to 1/8000 second are supported
Manual triggering of flashes is possible
PC sync terminal for connecting strobes and monolights
Multi Terminal connector for using separately available VMC-MM1 Multi Terminal Cable to trigger a7 II, a7R II, or a7S II camera
Cold foot on base with 1/4"-20 mounting thread
Dust and moisture-resistant construction for operating in less-than-ideal environments